TJ70GPI08
Fibertel
Availability: | |
---|---|
Specification
* 8 Port Gigabit Ethernet Injector * 8 Shielded RJ-45 LAN
* 8 Shielded RJ-45 LAN+POE
* 10/100/1000 data rates
* Injector: 180 mm x 45mm x 25mm (including 2x 10mm tabs)
* Power supply: 122mm x 53mm x 34mm (plus 12mm on each side for the tab)
* Wall mount - stackable
* 1000 ma automatic resettable fuse on each port
* Same voltage to all ports power is shared as needed by the devices
* Use with any Ethernet switch – PoE or non-PoE switches
* Standard power connector – 2.1mm x 5.5mm
* Additional Phoenix DC connector – 3.5mm model 1844236 – pin 2 (minus) pin 4 (plus)
* LED status indicator - Green standard polarity - Red for Reverse polarity
* Operating Temperature – 0 to 65 deg C
* Mode B operation – pins 7,8 (-) – pins 4,5 (+) – reversible with the WS-Cisco adapter
* Mode A pass thru
* Technical support: poe-world.com
* Ideal for IP Cameras, VOIP phone, WiFi Access Points
* Select the power supply you need – 30, 60 or 120 watts
* Power is always on - no auto negotiation
Part No. | TJ70GPI08 | |
Device Spec | Mode B - DC Input RJ45 pins 4,5+ 7,8- | Note |
Ubiquiti / Mikrotik | 24 volts | Up to 24 watts per port |
Canopy / Cambium | 24 Volts reverse | Use the WS-Cisco Reversing cable |
Specification
* 8 Port Gigabit Ethernet Injector * 8 Shielded RJ-45 LAN
* 8 Shielded RJ-45 LAN+POE
* 10/100/1000 data rates
* Injector: 180 mm x 45mm x 25mm (including 2x 10mm tabs)
* Power supply: 122mm x 53mm x 34mm (plus 12mm on each side for the tab)
* Wall mount - stackable
* 1000 ma automatic resettable fuse on each port
* Same voltage to all ports power is shared as needed by the devices
* Use with any Ethernet switch – PoE or non-PoE switches
* Standard power connector – 2.1mm x 5.5mm
* Additional Phoenix DC connector – 3.5mm model 1844236 – pin 2 (minus) pin 4 (plus)
* LED status indicator - Green standard polarity - Red for Reverse polarity
* Operating Temperature – 0 to 65 deg C
* Mode B operation – pins 7,8 (-) – pins 4,5 (+) – reversible with the WS-Cisco adapter
* Mode A pass thru
* Technical support: poe-world.com
* Ideal for IP Cameras, VOIP phone, WiFi Access Points
* Select the power supply you need – 30, 60 or 120 watts
* Power is always on - no auto negotiation
Part No. | TJ70GPI08 | |
Device Spec | Mode B - DC Input RJ45 pins 4,5+ 7,8- | Note |
Ubiquiti / Mikrotik | 24 volts | Up to 24 watts per port |
Canopy / Cambium | 24 Volts reverse | Use the WS-Cisco Reversing cable |