 |
24-way 7/3.5mm+1-way 14/10mm
Fibertel
Description
A bundle of micro or mini-tubes (strengthened wall size) is surrounded by single thin HDPE sheath. The
design makes the duct assemblies suitable for installation in other existing ducts. The micro ducts are
optimized for best cable blowing performance. The inner micro duct has suitable low friction characteristics on the inside surface.
Specification
| Material | HDPE |
| Inner micro duct | 7/3.5mm |
| Outer Diameter | 44.4mm (±0.5mm) |
| Thickness of sheathing | 1.2mm(±0.2mm) |
Description
A bundle of micro or mini-tubes (strengthened wall size) is surrounded by single thin HDPE sheath. The
design makes the duct assemblies suitable for installation in other existing ducts. The micro ducts are
optimized for best cable blowing performance. The inner micro duct has suitable low friction characteristics on the inside surface.
Specification
| Material | HDPE |
| Inner micro duct | 7/3.5mm |
| Outer Diameter | 44.4mm (±0.5mm) |
| Thickness of sheathing | 1.2mm(±0.2mm) |
