Have a question? Contact us now!     0086-13819879462       info@tjindustrialcompany.com
Horizontal type Fiber Optic Splice Enclosure
Home » Products » FTTx Solutions » Fiber optic enclosure » Horizontal type Fiber Optic Splice Enclosure
Share to:

Horizontal type Fiber Optic Splice Enclosure

  • TJ01E1102
Delivery Date:15-working daysBrand Name:T&J
Model:OFC-H004 / TJ01E1102Application:Aerial, Underground duct and hand-hole
Dimention:450x220x110mmCable ports:3 inlet & 3outlet
Diameter of fiber cable:Φ8 - Φ23 (mm)Max. capacity:12-96 bunchy fiber
Compliant:RoHSWeight (excluding outside box):2750g - 3200g
Origin:China


1. Scope of application

This Installation Manual is suit for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.

The scope of application is: aerial, underground, pipeline, handhole. The ambient temperature ranges from -40 to 65℃.


2. Basic structure and configuration

2.1 Dimension and capacity

Outside dimension (LxWxH)450x220x110 (mm)
Weight (excluding outside box)2750g-3200g
Number of inlet/outlet ports3 (pieces) on each side (total 6 pieces)
Diameter of fiber cableΦ8—Φ23 (mm)
Capacity of FOSC

Bunchy: 6—96 (Cores)

Ribbon: max. 216 (Cores)

 

2.2 Main components

No.

Name of components

QuantityUsageRemarks
1Housing1 setProtecting fiber cable splices in whole

Internal diameter:

378x136 (mm)

2Insert plate2 pairsFixing the housing175x56x30(mm)
3

Fiber optic splice tray

(FOST)

Max 4 pieces (either bunchy or ribbon)Fixing heat shrinkable protective sleeve and holding fibers

Suitable for:

Bunchy:6,12,24(cores) Ribbon:3,6 (pieces)

4Foundation1 setFixing reinforced core of fiber- cable and FOST
5Seal fitting1 setSealing between FOSC cover and FOSC bottom
6Port plug6 piecesSealing empty ports
7

Pressure

testing valve

1 setAfter injecting air, it is used for pressure testing and sealing testingConfiguration as per requirement
8Earthing deriving device1 setDeriving metallic components of fiber cable in FOSC for earthing connectionConfiguration as per requirement






 

2.3 Main accessories and special tools

No.Name of accessoriesQuantityUsageRemarks
1

Heat shrinkable protective sleeve


Protecting fiber splices

Configuration as per capacity

2Nylon tie

Fixing fiber with protective coat

Configuration as per capacity

3Insulation tape1 roll

Enlarging diameter of fiber  cable for easy fixing


4Seal tape1 roll

Enlarging diameter of fiber  cable which fits in with seal fitting

Configuration as per specification

5Hanging hook1 set

For aerial use


6Earthing wire1 piece

Putting through between earthing devices


7Abrasive cloth1 pieceScratching fiber cable
8Labeling paper1 pieceLabeling fiber
9Special wrench3 piecesFixing bolts, tightening nut of reinforced core
10Measuring paper1 pieceTo measure circle, of which its diameter is enlarged with seal tape
11

Buffer tube

 

To be decided by customersHitched to fibers and fixed with FOST, managing buffer

Configuration as per requirement

12Desiccant1 bagPut into FOSC before sealing for desiccating air.
RECOMMRND PRODUCTS
ABOUT US
T&J Industrial Co., Ltd is located in Ningbo China, with over 15 years of exporting experience, our currently customers are from over 30 countries.

PRODUCTS

FIND US NOW
CONTACT US
  info@tjindustrialcompany.com
   0086-13819879462
    Room 1008-1009 Romon Building, No.575 Tiantong South Road, Yinzhou District, 315100, Ningbo City, China.
    fiber-telecom.com

SUBSCRIBE

© 2020 T&J Industrial Co., Ltd. All Rights Reserved