Have a question? Contact us now!     0086-13819879462       info@tjindustrialcompany.com
Vertical type Heat-shrink Optical Fiber Enclosure
Home » Products » FTTx Solutions » Fiber optic enclosure » Vertical type Heat-shrink Optical Fiber Enclosure
Share to:

Vertical type Heat-shrink Optical Fiber Enclosure

Delivery Date: 15-working days Brand Name: T&J
Model: OFC-D010 Application: Aerial, Underground duct and hand-holes
Sealingstructure: Heat-shrinkable sealing Dimention: dia.220x490mm
Cable ports: 5 Max. capacity: 288 bunchy fiber
Compliant: RoHS Origin: China
Weight (excluding outside box): 3000g - 3600g Number of inlet/out ports: 6 pieces in general (max. 6 pieces)

Vertical type Heat-shrink Optical Fiber Enclosure 









 

1. Scope of application

This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.

 

The scope of application is: aerial, underground, pipeline, hand-holes. The ambient temperature ranges from -40 to 65℃.

 

2. Basic structure and configuration

2.1 Dimension and capacity

Outside dimension (Height x Diameter) 490mm×220mm
Weight (excluding outside box) 3000g— 3600g
Number of inlet/out ports 6 pieces in general (max. 6 pieces)
Diameter of fiber cable Φ8mm~Φ36mm
Capacity of FOSC Bunchy: 48-288 (cores), Ribbon: up to 864 (cores)

 

2.2 Main components

No. Name of components Quantity Usage Remarks
1 FOSC cover 1 piece Protecting fiber cable splices in whole

Height x Diameter

400mm x 220mm

2 Fiber optic splice tray (FOST)

Max.:5 trays (bunchy)

Max.: 5 trays  (ribbon)

Fixing heat shrinkable protective sleeve and holding fibers

Suitable for:

Bunchy: 48(cores) Ribbon: 24 (pieces)

3 Base 1set Fixing internal and external structure
4 Plastic hoop 1 set Fixing between FOSC cover and base
5 Seal fitting 1 piece Sealing between FOSC cover and base
6

Pressure testing valve

1 set After inject air, it is used for  pressure testing and sealing testing Configuration as per requirement
7

Earthing deriving device

1 set Deriving metal parts of fiber cables in FOSC for earthing connection Configuration as per requirement

2.3 Main accessories and special tools

No. Name of accessories Quantity Usage Remarks
1 Heat shrinkable protective sleeve
Protecting fiber splices

Configuration as per capacity

2 Nylon tie

Fixing fiber with protective coat

Configuration as per capacity

3 Heat shrinkable fixing sleeve (single)
Fixing and sealing single fiber cable

Configuration as per requirement

4 Heat shrinkable fixing sleeve (mass)
Fixing and sealing mass of fiber cable

Configuration as per requirement

5 Branching clip
Branching fiber cables

Configuration as per requirement

6 Earthing wire 1 piece Putting through between earthing devices
7 Desiccant 1 bag Put into FOSC before sealing for desiccating air.
8 Labeling paper 1 piece Labeling fibers
9 Special wrench 1 piece Tightening nut of reinforced core
10 Metal hoop 1 set For wall mounting and pole hugging
11

Buffer tube

 

decided by customers

Hitched to fibers and fixed with FOST, managing buffer. Configuration as per requirement
12 Aluminum foil paper

1piece

To protect the bottom of closure and inlet/outlet tubes when heating heat shrinkable fixing sleeve with fire sprays


Vertical type Optical Fiber Enclosure OFC-D010

RECOMMRND PRODUCTS
ABOUT US
T&J Industrial Co., Ltd is located in Ningbo China, with over 15 years of exporting experience, our currently customers are from over 30 countries.

PRODUCTS

FIND US NOW
CONTACT US
  info@tjindustrialcompany.com
   0086-13819879462
    Room 1008-1009 Romon Building, No.575 Tiantong South Road, Yinzhou District, 315100, Ningbo City, China.
    fiber-telecom.com

SUBSCRIBE

© 2020 T&J Industrial Co., Ltd. All Rights Reserved